![](/images/new-backgrounds/1255101/255101107x1.webp)
Programmable functions
Altering the standard drying level in the Automatic plus programme
The tumble dryer is designed to dry effectively using as little energy as possible.
However, if you require the laundry to be drier or damper, you can reduce or increase the default residual moisture in the Automatic plus programme.
Follow the steps (,, ...) to programme and store in memory.
Before you begin, ensure that:
–The tumble dryer is switched off.
–The door is closed.
Press the Start/Stop button and keep it pressed in whilst carrying out steps
Switch the dryer on.
Wait until the Start/Stop button lights up constantly . . .
. . . and then release the Start/Stop button.
Press the Low temperature button four times.
–The Low temperature indicator light will flash six times briefly.
A number to show which option is selected will appear in the display alternating with the letter P.
0Increased residual moisture. Laundry damper.
IStandard residual moisture (factory default setting)
(the Automatic plus indicator light will also flash once).
2Reduced residual moisture. Laundry drier.
(the Automatic plus indicator light will also flash twice).
Pressing the Start/Stop button switches between the options.
Switch the dryer off.
The setting you have selected is now stored in memory. You can change it again at any time.
To check the setting:
Carry out steps to .
Switch the dryer off after step .
54