Programmable functions
Standby
To save energy, the display and the programme sequence/check lights go out after 10 minutes and the Start/Stop button starts flashing slowly.
To come out of standby mode
Turn the programme selector or press a button. Neither will have any effect if a programme is running.
On
The standby function is activated and the display and programme sequence/check lights will go out after
10 minutes:
–if a programme is not selected after the dryer has been switched on.
–after a programme has started.
They will, however, come on for 10 minutes after a delay start time has counted down, at the end of the programme or the end of the
The buzzer (if selected ) will sound for 10 minutes at the end of the programme.
Factory default. Not in current programme
As described under "On".
However, the display and programme sequence/check lights will stay on after the programme has started and remain visible during the programme.
Off
The display and programme sequence/check lights will stay on while the dryer is switched on.
Follow the steps (,, ...) to programme and store in memory.
See next page.
56
