![](/images/new-backgrounds/1255101/25510129x1.webp)
Operating the tumble dryer
The display shows:
–Programme duration
–Programme stage Drying
Cooling down Finish
–Check and fault messages
The following are also selected via the display:
–Duration of the Warm air and Cool air programmes
–Delay start
You can select a programme and set it to start at a later time.
The programme will start automatically once the delay start time has a elapsed.
–Programmable functions
Default settings can be altered to adapt the dryer to different requirements. See "Programmable functions" at the end of this booklet for more details.
Perfect Dry indicator
The Perfect Dry system measures the residual content in the laundry in the sensor drying programmes to ensure perfect drying results.
After a programme has started, the electronics will estimate the duration of the programme (time remaining). The Perfect Dry indicator will flash while this is happening.
After a short while, the programme duration will appear in the display and the indicator will go out.
The Perfect Dry indicator will light up again when the selected drying level is reached and remain on until the programme is finished.
The Perfect Dry indicator does not light up during time controlled programmes: Woollens handcare, Cool air, Warm air, Gentle smoothing.
Programme duration / Estimated time remaining
The estimated duration (time remaining) will appear in the display.
The following factors all affect the estimated time remaining: residual moisture content after spinning; type of fabric; size of load; room temperature; fluctuations in power supply.
The electronics continually assess conditions in the dryer and adjust the estimated time remaining for a more accurate reading. Because of this, the time displayed can alter during the course of a programme.
Programmes can also finish earlier than expected, if, for example, particularly fine fabrics are being dried, the load is very small or items were partially dry beforehand.
15