Miele T 220 At the end of a programme, Selecting a different programme, Interrupting a programme

Models: T 220

1 44
Download 44 pages 26.86 Kb
Page 16
Image 16

How to dry correctly

Selecting a different programme

As long as the cooling down phase or the anti-crease phase has not been reached, it is possible to change a programme after it has started by turn- ing the programme selector to a differ- ent programme position.

Interrupting a programme

^Switch the machine off with the I-On /0-Offbutton.

To continue drying:

^Switch the machine on with the I-On /0-Offbutton.

With COTTONS and MINIMUM IRON programmes the programme will con- tinue unless the cooling down or anti-crease phase has been reached.

With other programmes:

^Press the START button.

Adding or removing items

^Open the door. Take out or add items as required.

^To continue drying close the door and press START.

To cancel a programme

^Turn the programme selector to Fin- ish or open the door .

The programme has been successfully cancelled when only the Anti-crease/Finishindicator lamp is on.

At the end of a programme

At the end of a programme the Anti-crease/Finishlamp will come on in the sequence display and the buzzer will sound.

The drum will continue to rotate at inter- vals to prevent laundry creasing, if you do not wish to remove it immediately (anti-crease). The anti-crease phase lasts for a maximum of 60 minutes, ex- cept with Woollens hand care programme.

^Press the Door button and open the drum door.

^Remove the laundry.

Make sure that the drum is empty. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used.

^Clean the filter.

^Close the door.

^Switch the dryer off by pressing the l-On/0-Offbutton.

16

Page 16
Image 16
Miele T 220 At the end of a programme, Selecting a different programme, Interrupting a programme, Adding or removing items