Installation - venting
Venting system with plastic piping
Plastic piping is a good option where the vented air has to be ducted for some distance. The smooth walls of the pipe are less resistant to the vented air than the walls of a flexible vent hose, for example. Time and en- ergy consumption are better with plastic piping.
^The following items are required: . .
. . . an adapter* with rib on the inside.
. . . a wall vent kit* or window vent kit*.
* (Miele optional accessory)
. . . Suitable piping available from your dealer or builder’s merchant. Where the pipe diameter is more than 100 mm, additional adapters are nec- essary (e.g. to increase from C 100 to 125 mm) to connect the pipe to the dryer.
AThe ring adapter (1) only needs to be fitted into the Miele adapter (2), if the total duct length is less than 10 m.
If the total duct length is greater than 10 m the ring adapter is not required.
BFit Miele adapter (2) into the vent opening on the dryer.
CAttach the pipe (3).
Example
1.Wall vent kit
(Separate fitting instructions are supplied with the Miele wall vent kit).
2.Adapter
3.Plastic piping, diameter DN 100
33
