Electronic system lock | Miele T 4422 C manual

Electronic system lock

The system lock prevents anyone from interfering with the dryer.

If the system lock has been activated it is not possible to start a programme.

The following steps (A,B,C...) must be carried out in the correct order.

Please proceed step by step:

To activate the system lock

AEnsure that the door is closed and that the programme selector is turned to Finish.

BSwitch on the dryer with the I-On/O-Offbutton.

CPress the Anti-creasebutton and keep it pressed in while carrying out steps D to F.

DSlowly turn the programme selector clockwise stage by stage until it reaches the COTTONS/Normal position.

ESlowly turn the programme selector anti-clockwise stage by stage until it reaches the Finish position.

FSlowly turn the programme selector anti-clockwise stage by stage until it reaches the MINIMUM IRON/Hand iron position.

The Locked indicator lamp will flash.

GRelease the Anti-creasebutton. The system lock is now activated.

HSwitch off the dryer with the I-On/O-Offbutton.

To de-activate the system lock

^Repeat steps A-G.

The Locked indicator lamp will go out after step F.

20

Image 20

Miele T 4422 C operating instructions Electronic system lock, To activate the system lock, To de-activate the system lock

Contents

Operating instructions For condenser tumble dryer T 4422 C Contents Contents Technical safety Correct use Operation Using accessories Caring for the environment Disposal of the packing materialDisposal of your old machine Energy saving tips Control panel / Features DAdditional option buttons Indicator lampsGuide to the appliance Display Electronic lock and programmable functions Future updatesTime left display for Cottons and Minimum Iron programmes Tips on drying Wash care labels Programme chart Cool air Programme Fabric type Special notesWarm air Hand care Smoothing Prepare the laundry How to dry correctlyLoad the drum and switch on the dryer Selecting a programme Selecting additional options Anti-crease Delay start Low temperatureShort Buzzer Clean out airways indicator lamp Starting a programmeAfter drying Additional notes Brief instructions To cancel a programme and select a different programme To change a programmeTo interrupt a programme Adding or removing items To de-activate the system lock Electronic system lockTo activate the system lock Cleaning and care Emptying the condensed water container Cleaning the fluff filters Cleaning them whilst dry Cleaning the tumble dryer Cleaning them with water Cleaning the condenser unit Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Replacing the condenser unit Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not Sufficiently dry Goes on too long or Problem Possible cause Remedy Drying processEven switches off Problem Possible cause Remedy Condenser unit Service panel willBeen cleaned Interior drum Finish indicator Problem Possible cause Remedy Stops and the CleanAirways lamp comes Flashes Problem Possible cause Remedy Programme has Symbols flashBeen interrupted Flashing, To change the interior drum lamp After sales service Future updates PCOptional accessories Repairs Installation Front view Replacing the lid Installation siteTransporting the machine to its installation site Before moving the machine again e.g. when moving house Aligning the machineRoom in which the dryer is located Washer dryer stack External condensed water outlet Pulling out the drain hose Connection to a sink drain outlet Electrical connection U.K Electrical connection U.K. Non-rewireable plugs BSElectrical connection Must be Earthed Consumption data Cottons Technical data Page Programmable functions for changing standard settings Programmable functions Increased drying levelProgramming and storing in memory To check Memory Alteration rights reserved/0504