Memory
The additional options selected
previously for specific programmes
are stored in the machine’s memory.
The machine is delivered with this
programmable function deactivated. It
can be activated if wished.
Programming and
storing in memory
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
APress the additional option buttons
Short
and
Low temperature
at the
same time, hold pressed in and ...
B... switch on the dryer with the
I-On/0-Off
button.
CLet go of all these buttons.
–"P" will appear in the display.
–The
Drying
and
Cool air
indicator
lights will flash.
DTurn the programme selector to
COTTONS,Normal.
EThe number of the programmable
function will flash alternately with the
"P" on the left of the display -
P: P...3...P... 3... .
The number on the right will show
constantly:
0= Memory function - off
1= Memory function - on
FPress the
Start
button to change the
number on the right from
0to 1=onor from
1to 0=off
.
The setting you have selected is now
stored in memory.
GSwitch the machine off with the
I-On/0-Off
button.
To check:
^Carry out steps Ato E.
^Switch off the dryer.
The check is complete.
Programmable functions47