Miele T 8023 C installation instructions Cleaning the condenser, Removing the condenser

Models: T 8023 C

1 40
Download 40 pages 16.17 Kb
Page 17
Image 17

Dryer care

Cleaning the condenser

￿To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance.

￿Clean the condenser every 6 months and when the "Filter/Vent" indicator lights. Clean approximately every 100 uses when the dryer is used often.

￿Turn the condenser door lock down and remove the door up and out.

Removing the condenser

The access panel to the condenser is located on the lower left corner of the dryer.

￿Open the access panel with the supplied yellow tool.

￿Remove the panel up and out of the condenser access area.

￿Turn the condenser lock up.

￿Pull out the condenser.

17

Page 17
Image 17
Miele T 8023 C installation instructions Cleaning the condenser, Removing the condenser