Example Connection to a sink standpipe | Miele T 8023 C specification

Installation

Installation requirements demanding a non-return valve

To prevent water from flowing back into the machine a non-return valve must be installed at the following installations:

–Installation to a sink standpipe

–Several installation possibilities where additionally another washer or dishwasher is connected to.

Example: Connection to a sink standpipe

Connect the drain hose with a non-return valve directly to a sink standpipe.

Remove the accessories from the top rear of the dryer:

Connector 1 and the hose clamp 3 behind it.

33

Image 37

Miele T 8023 C Installation requirements demanding a non-return valve, Example Connection to a sink standpipe

Contents

En US, CA Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use only Control panel Program recommendations Before loading the dryer Turn on the dryer and load the laundry Using the dryerSelect a program Extra Dry Available drying options Gentle, Anti-crease Turbo Select a drying option if neededGentle Anti-crease Select the dryness level To adjust the buzzer volumeSelect the buzzer if desired At the end of a program Start the program Adding or removing laundry during a program Canceling or changing a program Child lock Child lockTo activate the child lock To deactivate the child lock Dryer care Cleaning the lint filter Cleaning the drum Cleaning the exterior and the control panel Emptying the condensed water container Removing the condenser Cleaning the condenser Rinsing the condenser Returning the Condenser Remove this guide for easy reference Quick Guide Turn on the dryer and load Quick GuideLaundry Select a drying option if needed At the end of a program Quick Guide Normal Available drying options Turbo, Gentle, Anti-crease Program When to use Changing the light bulb What if the dryer will not run? Possible fault Solution Frequently asked questionsHow do I prevent static cling? What if the laundry is not dry enough? Possible fault PC Update After sales serviceRepairs MieleCare Installation Instructions Save These Instructions Washer / Dryer Stack Height of a stacked installation Electrical connection Front view Installation Transporting the dryer to the installation site Rear view Installation site Reinstallation of the machine lid Installation beneath a counter Room ventilation Installation tips Level the dryer External water drain Installing the drain hose Connection to a standpipe Draining the condensed water into a sink Example Connection to a sink standpipe Installation requirements demanding a non-return valve Install the connector 1 with the sink Disposal of the packing materials Caring for the environmentDisposal of an appliance All rights reserved Nr 460 400