Miele T 8023 C installation instructions Start the program, At the end of a program

Using the dryer

6. Start the program

￿Press the "Start/Stop" button.

Once the program starts, the current cycle of the program will be indicated in the "STATUS" display.

7. At the end of a program

The "End/Anti-crease" indicator will light at the end of a program and the buzzer will sound if it was selected.

If a fault occurred, a "FAULT" indicator will light. See "Frequently asked questions" for details.

￿Press the "Door" button.

￿Open the door.

￿Remove the laundry.

￿Check that the drum is empty.

￿Clean the lint filter after each use (see "Dryer care").

￿Close the door.

￿Press the "On/Off" button to turn off the dryer.

￿Empty the condensed water container weekly (if not connected to a drain).

11