Miele T 8023 C installation instructions Install the connector 1 with the sink

Installation
	￿ Install the connector 1 with the sink
	connecting nut 2 to the sink
	standpipe.
	Usually the sink connection nut is
	equipped with a washer. Please
	remove the washer.
	￿ Plug the hose end 4 to the connector
	1.
	￿ Using a screwdriver tighten the hose
	clamp 3 directly behind the sink
	connecting nut.
	￿Install the non-return valve 5
	vertical or slightly angled. If installed
	horizontal it will not operate
1 Connector	correctly.

2Sink connecting nut

3Hose clamp

4Hose end

5Non-return valve

6Dryer drain hose

￿Connect the non-return valve 5 to the dryer drain hose 6. See illustration for the correct direction.

￿Fasten the non-return valve with the hose clamps.

34