Programme sequence
This machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate. This means that programme cycles and durations can vary.
The programme sequences outlined in the chart are based on the basic programme with a full load. Extra options which can be selected have not been taken into account.
The display shows the stage the programme has reached.
Special features in the programme sequences:
At the end of every programme, with the exception of the Woollens programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. The door can be opened and laundry removed at any time during the
1)A second rinse is carried out when a temperature of 60°C to 95°C has been selected. A third rinse is carried out when a temperature below 60°C is selected.
A third/fourth rinse is carried out if:
–there is too much foam in the drum
–a spin speed lower than 700 rpm has been selected
–No u has been selected
2)A third rinse is carried out if: No u has been selected
23
