Problem solving guide
With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem | Possible cause | Remedy |
The display remains | There is no power to | Check whether |
dark, and the Start/ | the machine. | – the mains plug is plugged |
Stop button indicator |
| in and switched on. |
light does not come |
| – the fuse or circuit breaker |
on. |
| has tripped. |
|
| |
You are asked to enter | Access via a code has | Enter the code and confirm |
a code. | been activated. | the entry. Deactivate the code |
|
| if you do not wish this |
|
| message to appear in the |
|
| display the next time the |
|
| machine is switched on. |
The display is dark. | The display has | Press a button. Standby |
| switched off | comes to an end. |
| automatically to save |
|
| energy (Standby |
|
| mode). |
|
|
|
|
33
