Installation and connection

,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed.

^Fit the covers onto the two holes. Then plug the holes as shown with the caps.

^Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over retainers a.

,The machine must not be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use. They must be re-fitted if the machine is to be moved again (e.g. when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the procedure.

45

Page 45
Image 45
Miele W 1514 operating instructions Re-fitting the transit bars