Garment care label symbols | Miele W 1514 guide

Garment care label symbols

Washing

The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.

9No bar under the symbol: = normal agitation

4One bar under the symbol: = reduced agitation

cTwo bars under the symbol: = much reduced agitation

/Hand wash (if no temperature is specified use the lowest temperature or cold)

hDo not wash

Drying

The number of dots indicates the drying temperature

qNormal temperature

rLow temperature

sDo not tumble dry

Ironing

The number of dots indicates the ironing temperature

IHot iron (max sole plate temp. approx. 200°C)

HMedium hot iron (max sole plate temp. approx. 150°C)

GCool iron (max sole plate temp. approx. 110°C). Do not steam iron garments carrying this symbol.

JDo not iron

Professional cleaning

fDry clean only. The letters

pindicate the type of cleaning agent required.

wProfessional Wet Clean only

DDo not dry clean

Bleaching

xAny oxidising bleaching agent can be used

{Only use an oxygen based bleach or a non-chlorine bleach

zDo not bleach

24

Image 24

Miele W 1514 operating instructions Garment care label symbols

Contents

Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance or machine Contents Contents Technical data Safety with children Correct application Technical safety Correct use Accessories Operating the washing machine Control panel Programme duration Programmable functions Before using for the first time Setting the languageReminder to remove transit bars Running your first programme When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption Detergent How to wash correctly Brief instructionsSort the laundry Switch on the washing machine Load the drum Select a temperature / spin speedShut the door with a gentle swing Select a programme Select an extra options ShortWater plus Pre-wash Add detergent Remove the laundry when the programme has finished Start the programme Spinning Final spin speedRinse and interim spin To omit the final spin Rinse hold Programme chart Automatic Cold to 40C Max. load 3.5 kg Shirts Cold to 60C Max. load 1.5 kgDenim Cold to 60C Max. load 2.0 kg Dark garments Cold to 40C Max. load 3.0 kg Programme sequence Main wash Rinses Spinning Special features in the programme sequences Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programme Safety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has started Detergent Correct detergentAll purpose Detergent for Coloured fabrics Delicates Whites Water softeners Washing with several componentsRight amount to dispense will depend on the following Fabric conditioners and liquid starch Colour run and dye removers / dyes Cleaning and care Cleaning the detergent dispenser drawerExtra cleaning External casing and fascia panel Cleaning the siphon and conditioner channel Cleaning the detergent dispenser drawer housingDescaling the machine Cleaning the water inlet filters To clean the filter in the water inlet valve Problem solving guide Programme does not start Fault messages in the display Problem Possible cause Remedy a General problems An unsatisfactory wash result Drum door does not open when you press the Door button Procedure for draining the machine Remove the leverBlocked drain outlet Opening the drum door After sales service Future updates PCAppliance guarantee Optional accessories Installation and connection Front view Rear view Installation surface Transporting the machine to its installation siteRemoving the transit fittings Withdraw the transit bar Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machine Building under a worktop Washer-dryer stackPlease note Electronic unit and washing machine housing Miele water protection systemInlet hose Drain hose Maintenance and care Connection to the water supplyExtension hose Connection to the drainage system Drain hose connection Non-rewireable plugs BS Electrical connection U.K Consumption data Technical data Programmable functions For changing default settings Programmable functions Language F Water plus Gentle actionSuds cooling To use the washing machine when the code is activated CodeTo activate the code To enter the code Temperature unit BuzzerKeypad tone Brightness Standby display Memory Anti-creaseNot in current prog Off Alteration rights reserved/1707/W Nr 972 310