| Problem solving guide | |
|
|
|
|
|
|
Fault messages in the display |
| |
|
|
|
Problem | Possible cause | Remedy |
|
|
|
lights up in the | – The water outlet is | – Clean the drain filter and |
display and | blocked or | the drain pump. |
Drain fault | restricted. | – The maximum delivery |
flashes. | – The drain hose has | head is 1 m. |
| been fixed too high. |
|
|
|
|
lights up in the | – The water inlet is | Check whether |
display and | blocked or | – the stopcock is opened |
Water inlet | restricted. | properly. |
fault |
| – the inlet hose is kinked. |
flashes. |
| |
| – the water pressure is too | |
|
| |
|
| low. |
|
|
|
lights up in the | The water protection | Call the Service Department. |
display and | system has reacted. |
|
Waterproof |
|
|
fault |
|
|
flashes. |
|
|
|
|
|
lights up in the | There is a fault. | Start the programme again. |
display and |
| If the fault message appears |
Technical |
| again, contact the Service |
fault |
| Department. |
flashes. |
|
|
|
|
|
Excessive foam has | Use less detergent next time | |
Chk detergent | built up during | and follow the manufacturer's |
flashes in the display. | washing. | instructions on dosage given |
|
| on the packaging. |
|
|
|
To switch off the fault message: Switch the machine off with
35
