Problem solving guide

What to do if, . . .

Cause . . .

Remedy . . .

 

 

 

. . . the “Pre-wash”, “Main

There is an internal problem.

Restart the program. If the

 

indicator lamp starts flashing

wash” or “Rinse 1-2” indicator

 

 

again, call the Service Dept.

lamp is flashing?

 

 

 

. . . The “Rinse & hold” indica-

The spin speed selector has

Select a spin speed setting.

tor lamp is flashing?

been set to “Without final spin”.

 

 

 

. . . The “Final spin” indicator

The final spin has not taken

Redistribute the laundry load.

place. The machine detected

Select a spin speed.

lamp is flashing?

an imbalance.

 

Turn the program selector to

 

 

 

 

“Spin”.

 

 

 

. . . The “ON” indicator lamp

The child-safety feature is

Go back to the program

activated, and the program has

originally selected.

is flashing?

been changed.

 

 

 

. . . The wash is too wet after

The spin speed selected was

Select a higher spin speed next

too low.

time.

the final spin?

 

 

 

The load was not evenly

Mix large and small items in a

 

distributed in the drum, and the

load to avoid imbalance.

 

laundry was spun at a reduced

 

 

speed to protect the machine.

 

 

 

 

 

The drain pump or lint trap is

Clean the drain pump or lint

 

clogged.

trap.

. . . The machine shakes dur-

The four feet are not resting

Level the machine (see

evenly on the floor.

Installation Section).

ing the spin cycle?

 

 

 

The shipping struts have not

Remove the shipping struts.

 

been removed.

 

 

 

 

26

Page 26
Image 26
Miele W 1930I operating instructions What to do if Cause Remedy