Problem solving guide

Any work done on the electrical components of this appliance should only be performed by a qualified and trained person in accordance with all local and national codes and regulations. Unauthorized repairs may result in personal injury and damage to the machine.

What to do if, . . .

Cause . . .

Remedy . . .

 

 

 

. . . The program does not

There is no power.

Check that..:

The “ON” indicator lamp has

the door is properly closed.

start?

 

not lit up.

the machine is plugged in.

 

 

 

 

the fuse or circuit breaker has

 

 

not tripped.

 

There is power and the “ON”

Turn the program selector to

 

indicator lamp is on, but the

the “Finish / Start” position.

 

program selector has not been

Select a program.

 

turned to the “Finish / Start”

 

 

 

position.

 

 

 

 

. . . The “Check p / q” indi-

The “Check p” indicator lamp

The inlet valve is not opened

is flashing, and the program

far enough.

cator lamps are flashing?

has started.

The inlet hose is kinked.

 

 

The water inlet is blocked.

 

The water pressure is too low.

 

 

 

 

Call the Service Dept.

 

 

 

 

The “Check q” indicator lamp

Clean the drain pump and lint

 

is flashing.

trap.

 

The drain is blocked.

Has the drain hose been

 

 

 

 

installed too high? (max drain

 

 

height = 4 feet)

 

 

 

25

Page 25
Image 25
Miele W 1930I Problem solving guide, Program does not, Start?, Check p / q indi, Cator lamps are flashing?