Installation

Sizing the toekick

Installing the toekick

The appliance toekick visible below the door can be partially conceated by in- stalling a custom made toekick that matches the adjacent cabinetry.

Please note: The depth of recess and height of the appliance toekick cannot be altered.

The lenght of the matching toekick should be 23 5/8" (600 mm). Maximum toekicks heights are listed below.

Height from the

Number

Maximum

floor to the bot-

of

toekick height

tom of the

spacer

 

countertop

frames

 

 

rquired

 

 

 

 

32 1/4" (820 mm)

none

3 15/16" (100 mm)

34 1/4" (870 mm)

1

5 15/16" (150 mm)

36 1/4" (920 mm)

2

7 7/8" (200 mm)

The matching toekick must be cut out so that access to the emer- gency drain and door release panel is not impeded.

Align and attach the two Velcro strips to each other. Cut the strip into three equal pieces.

Remove the protective backing from one side of the three Velcro strips. Press them into place on the washer toekick.

Peel the protective backing off of the second, exposed side of the Velcro strip.

Align the matching toekick with the machine toekick and press it fimly into place.

Washer-Dryer stack

This Miele washing machine can be in- stalled as a washer/dryer stack together with a Miele tumble dryer. For this purpose, a stacking kit, available from the Miele Parts Dept., is needed.

A washer and dryer should never be stacked without using the proper stacking kit.

38

Page 38
Image 38
Miele W 1930I operating instructions Sizing the toekick Installing the toekick, Washer-Dryer stack