Once the flow of water stops:
^Remove the lint trap lid.
^Clean out any foreign objects or lint
from the filter.
^Check that the drain pump impeller
(in the back of the chamber) rotates
freely by spinning with your hand.
^Clean the inside of the lint trap hous-
ing.
Remove any detergent deposits or
foreign objects from the threads of
the filter housing and filter unit before
returning the lint trap.
^Return the lint trap and tighten into
place.
,If the lint trap is not tightened se-
curely water will leak out when the
machine is used.
After cleaning:
^Run the "Fine rinse" program.
This step is necessary to activate the
ball valve.
Washer care
24