Programmable functions
Maximum water level
The water level for rinsing is automati-
cally raised to the maximum level
where rinse results are particularly im-
portant.
It is effective for the rinses in the follow-
ing programmes:
- Cottons
- Minimum iron
- Quick wash
- Mixed wash - Poly/Cottons
Before the "Maximum water level" pro-
grammable function can be selected
you must first select programming
mode.
Selecting programming mode
1The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3. . . switch the machine on with the
“I-ON/0-OFF”-button.
4Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Maximum water level" pro-
grammable function: turn the pro-
gramme selector to –
MIXED WASHPoly/Cottons***.
Activating
To activate "Maximum water level"
press the "START" button once.
The "Rinses" light comes on in the se-
quence display.
Storing in memory
To store the "Maximum water level" pro-
grammable function in the memory
SWITCH the machine OFF with the
“I-On/0-OFF" button.
The "Maximum water level" programm-
able function is now stored in the ma-
chine’s memory and is effective in the
programmes described above until
such time as you may wish to deacti-
vate it.
Deactivating
To deactivate the use of a maximum
water level in the rinses repeat the pro-
cedure given above from point 1 as far
as the *** shown above. Press the
START button and the “Rinses” indica-
tor light will go out. The function is now
deactivated. Store in memory by press-
ing the I-On/0-Off button.
Programmable functions
30