Soak time
This is accessed for a programme by
pressing the SOAK button on the
facia.
You can programme a soak time of:
- 2 hours (factory setting) or
- 1 hour 30 mins or
- 1 hour or
- 30 mins.
A "Soak time" of 2 hours is set at the
factory. If you wish to change this
standard setting to one of the times
listed above, you must first select pro-
gramming mode.
Selecting programming mode
1The machine must be switched off
and the drum door closed. The pro-
gramme selector must point to "Fin-
ish".
2Press the additional option buttons
"Short" and "Water plus" at the same
time and hold pressed in and:
3. . . switch the machine on with the
“I-ON/0-OFF”-button.
4Let go of all these buttons.
The indicator light "Main wash" flashes
in the sequence display.
Selecting the programmable function
To select the "Soak time" programmable
function turn the programme selector to
– WOOLLENS Cold.
The "Rinse" indicator light comes on in
the sequence display. This shows that
a "Soak time" of 2 hours is currently se-
lected (factory setting).
Selecting a different "Soak time"
By pressing the "START" button a
various number of times you can select
different soak times. To confirm that a
different soak time has been selected,
the previous indicator light goes out
and a new indicator light comes on.
Each time "START" is pressed a differ-
ent indicator light will come on. The indi-
cator lights correspond to the 4 soak
times available as follows:
2 hours = "Rinse"
1 hour 30 mins = "Rinse hold"
1 hour = "Drain \ Spin"
30 mins = "Anti crease \ Finish"
Storing in memory
When you have selected the soak time
you require, SWITCH the machine OFF
with the “I-On/0-OFF" button.
The "Soak time" you have selected is
now stored in the machine’s memory.
Programmable functions
34