Miglia Technology TV Max+ manual Hardware Installation, Coaxial connection

I. Hardware Installation

1.Connect the power supply to the “Power” socket located at the back of TVMax+. Verify the green LED on the front panel of the unit is lit.

2.Connect the USB 2.0 cable provided from a USB 2.0 port of your computer to TVMax+.

Note: We strongly recommend using the USB 2.0 cable provided with TVMax+. Do not use low quality cables or very long cables as this will affect the performance of the unit.

II. Connecting your video source

1.Coaxial connection

If you receive TV channels via a roof-mounted antenna, an analogue cable service or a portableantenna, you will most likely want to use the TV input on TVMax+.

Connect your coaxial cable as shown on the illustration below

TVMax+™ User Guide

Page 5