Milan Technology T1E1-CF-01(SE) T1E1-CF-01 IN THE NETWORK, Features, Technical Specifications

T1E1-CF-01 IN THE NETWORK TECHNICAL SPECIFICATIONS

NOTE: THE T1E1-CF-01 REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK.

OR	E1	T1 OR E1
T1 or E1		Network Extension
	UTP/STP	Fiber

Standards	Emissions: CISPR A
	T1/E1 Physical Layer: ITU-T, ANSI, AT&T, ETSI
Case Dimensions	4.75" x 3.0" x 2.0"	(119mm x 76mm x 50mm)
Shipping Weight	3 pounds	(1.4 kilograms)
Delay	400nsec round trip
Environment	Temperature:	0-50°C (32° to 122° F )
	Humidity	10-90%, non condensing
	Altitude	0-10,000 feet

Power Supply Requirements Replace power supply with only the equivalent input rating (see below) and output rating (unregulated 9 VDC).

T1 or E1

E1

TN PN	Requirement	Location
3507	240 volts, 50 hertz	United Kingdom
3342	230 volts, 50 hertz	Europe
3340	120 volts, 60 hertz	USA/Canada/Mexico
3346	100 volts, 50-60 hertz	Japan
3511	240 volts, 50 hertz	Australia
3537	(with power cord: 3522)	South Africa

NOTE: This product also can be powered by the Transition Networks E-MCR series media converter rack.

WarrantyLifetime

E1

OR

CSU

T1 or E1

T1 or E1

OR

To Telco

To Telco

		DECLARATION OF CONFORMITY
Name of Mfg:	Transition Networks
	6475 City West Parkway, Minneapolis MN 55344 USA

Model:T1E1-CF-01 Series Copper-to-Fiber Media Converter

Part Number: T1E1-CF-01, T1E1-CF-01(SC), T1E1-CF-01(SM),

Features

•Media converter is framing independent (as ESF vs D4) and supports all common line codes, (AMI, B8ZS, HDB3).

•Distance extensions of 2 km 850 nm multimode or 8 km 1300 nm singlemode.

•Jitter attenuators optimize Bit Error Rate (BER) performance.

•Dry relay contacts allow media converter to be tied into separate alarm circuit

•All Ones Insertion (AIS), indicated by LEDs, on loss of signal at copper and/or fiber interface.

T1E1-CF-01(LH)

Regulation: EMC Directive 89/336/EEC

Purpose: To declare that the T1E1-CF-01and T1E1-CF-01(SM)to which this declaration refers is in conformity with the following standards.

EMC-CISPR 22: 1985 Class A; EN 55022: 1988 Class A; EN 50082-1:1992; EN 60950 A4:1997; IEC 801.2, IEC 801.3, and IEC 801.4; IEC 950

I, the undersigned, hereby declare that the equipment specified above conforms to the above Directive(s) and Standard(s).

	_June 8, 1999_____
Stephen Anderson, Vice-President of Engineering	Date