Millennium Enterprises Stereo150 manual Assigning Midi Control to the Expression Pedals

Section - 6 The J-12 Foot Controller

Johnson Millennium

5.Now to assign the CC number, just turn the <4> knob until you have reached the desired CC. The display will now read something like this:

C1FC: Bank FS=Tog CCTran

2

￿￿

1

127

2

1￿

3

6

4

LINK CHANGED

LINK CHANGED

LINK

CHANGED

LINK CHANGED

COMP WAH

TUBE EQ

#

GATE

L/R OUTS

FACTORY USER

SEAMLESS

PAGE10 OF13 b

DIGITAL

CLIP

L/R OUTS

6. Press the <Preset> button to exit the Foot controller setup menu.

Assigning MIDI Control to the Expression Pedals

This series of menus and submenus allows MIDI setup of the Expression pedals of the J-12. There are two procedures you must do in order for the Expression pedals to work properly with MIDI:

1.Assign CC Number

2.CC Transmit Channel

Assign CC Number to Expression Pedals - This option allows you to choose the MIDI CC numbers you want to use for sending continuous control messages using any one of the 4 Expression pedal options. These assignments can be done on pages 11 and 12 of the Utility menu. From the Factory, the Expression pedal(s) are not pre-assigned to any MIDI CC number. To assign which CC number is sent from the Expression pedal(s), do the following.

1. Press the <Utility> button once. The display appears something like this:

2		Output:Stereo						￿￿ EQ/Mix
		1								LoC
				2	2				4
		LINK CHANGED	LINK CHANGED				LINK CHANGED		LINK CHANGED
			COMP WAH		TUBE EQ	#	GATE
											L/R OUTS
FACTORY USER	SEAMLESS
PAGE 1 OF 13 b							DIGITAL
							CLIP				L/R OUTS

2. Turn the <Page> knob to page 11 and the display will appear something like this:

		CCSnd: Exp1						Exp2		Exp3
2								￿￿
		1			OFF			OFF		OFF
				2			3		4
		LINK CHANGED	LINK CHANGED				LINK CHANGED		LINK CHANGED
			COMP WAH TUBE EQ			#	GATE
											L/R OUTS
FACTORY USER	SEAMLESS
PAGE11 OF 13 b							DIGITAL
							CLIP

72

User Guide