SECTION 4 − OPERATION
4-1. Controls for Migmatic 271/273
8
7
6
5
| 1 | Voltage Control |
| Turn control clockwise to increase | |
| voltage. | |
| 2 | 2T/4T Trigger Hold Function |
| Latching Torch Trigger | |
| 3 | Power Switch |
| 4 | Work Lead Connection |
1 | 5 | MIG Torch Connection |
| 6 | Digital Display Function |
|
| Button* |
| 7 | Wire Feed Speed Control |
2 | Turn control clockwise to increase | |
| wire feed speed. | |
| 8 | Digital Display* |
| Volts/Amps/Wire Feed Speed with | |
3 | last value hold function. Trigger | |
mode (2T/4T) is shown at power on | ||
| for 3 seconds and when Trigger | |
| mode is changed. | |
| . Not shown: | |
4 |
| Jog and Purge controls are lo- |
|
| cated under the hinged side |
|
| wire consumable access door. |
* Optional
4-2. Controls for Migmatic 293/333
9 |
|
| 1 |
8 |
|
6 in | 2 |
| |
| 3 |
7 |
|
| 4 |
6 |
|
| 5 |
1 Voltage Control (Fine Adjust)
Turn control clockwise to increase voltage.
2Voltage Control (Coarse Adjust)
Turn control clockwise to increase voltage.
32T/4T Trigger Hold Function Latching Torch Trigger
4Power Switch
5Work Lead Connection
6MIG Torch Connection
7Digital Display Function Button*
8Wire Feed Speed Control
Turn control clockwise to increase wire feed speed.
9 Digital Display*
Volts/Amps/Wire Feed Speed with last value hold function. Trigger mode (2T/4T) is shown at power on for 3 seconds and when Trigger mode is changed.
.Not shown:
Jog and Purge controls are lo- cated under the hinged side wire consumable access door.
* Optional
