Miller Electric Digital Elitet manual Specifications, All shades provide continu

SECTION 2 − SPECIFICATIONS

Viewing Field	97 x 60mm/3.81 x 2.62 in
Reaction Time	0.0000500sec (1/20,000)
Operating Modes	4 Modes: Weld, Cutting, Grind, X Mode
Available Shades	Weld Mode:	Darkened State: No. 8 − No. 13
All shades provide continu-		Light State: No. 3
	Cutting Mode: Darkened State: No. 5 − No. 8
ous UV and IR protection.
		Light State: No. 3
	Grind Mode:	Light State: No. 3
	X Mode:	Darkened State: No. 8 − No. 13
		Light State: No. 3
Sensitivity Settings	Adjusts for varying ambient light and welding/cutting arc
	Weld Mode: No. 0 − No. 10
	Cutting Mode: No. 0 − No. 10
	Grind Mode: Not Applicable
	X Mode: No. 0 − No. 10
Delay Settings	Slows lens dark-to-light state
	Weld Mode: No. 0 − No. 10
	Cutting Mode: No. 0 − No. 10
	Grind Mode: Not Applicable
	X Mode: No. 0 − No. 10
Automatic Power Off	Shuts lens Off 15−20 minutes after last arc is struck
Low Battery Indicator	Display indicates 2−3 days remaining battery life
Power Supply	CR2450 Lithium Batteries (Miller Part No. 217 043)
Sensors	Independent/Redundant (Four)
Operating Temperature	14_F to 131_F / −10_C to +55_C
	. When stored in extremely cold temperatures, warm hel-
	met to ambient temperature before welding.
Storage Temperature	−4_F to 158_F / −20_C to +70_C
	. When stored in extremely cold temperatures, warm hel-
	met to ambient temperature before welding.
Total Weight	510.3 g (1 lb 2oz.)
Standards	ANSI Z87.1 and CSA/TUV
Warranty	2 years from date of purchase (see Section 11)

.The helmets in this manual are covered by one or more of the following patents:

U.S. Patent − No. 6,552,316, No. 6,483,090, No. 6,614,409

U.S. Patent Application − No. 29/223,100, No. 11/053,977, No. 10/565,858, No. 11/589,542 DE. Patent − No. 199 59 944 C2, No. 199 59 945 C2

FR. Patent − No. 9916004

OM-234 388 Page 2