Miller Electric Digital Elitet instruction

3-2. On-Off Button And Low Battery Indicator

1 On-Off Button

Press On-Off button to check if the lens is working properly and to be- gin lens shade, sensitivity, and delay adjustments.

When the On-Off button is pressed, the lens should darken and return to the clear state. Do not use the hel- met if the lens does not function as described. (See Section 9, Trouble- shooting.)

2 Low Battery Indicator

The message “Low Battery” ap- pears on the display screen when 2−3 days of battery life remains.

If battery power is low, replace with CR2450 lithium batteries (2 re- quired − Miller Part No. 217 043) See Section 6.

12

805 010

OM-234 388 Page 4

Image 6

Miller Electric Digital Elitet manual On-Off Button And Low Battery Indicator

Contents

OM-234 388B 2007−08 Table of Contents Hazards ARC Rays can burn eyes and skin − Safety Precautions − Read Before UsingSymbol Usage Noise can damage hearing All shades provide continu − SpecificationsMet to ambient temperature before welding Ous UV and IR protection − Operating Instructions Helmet Controls On-Off Button And Low Battery Indicator Mode Control Nearby welding may affect hel Variable Shade Control Grind Mode − No sensitivity adjustment Recommended Sensitivity SettingsSensitivity ranges for each mode are as follows Sensitivity Control Lens Delay Control There is no lens delay adjust- ment in the Grind mode Lens Adjustment Procedure Adjusting Lens Assembly − Adjusting Headgear − Replacing the Lens Covers Outside Lens CoverInside Lens Cover − Replacing the Battery To prevent lens fogging, install − Installing Optional Magnifying Lens− Maintenance Ward auto-darkening lens − Troubleshooting To the clear state − Parts List Miller Adjustment Hardware Kit With O-rings OM-234 388 770 Ratchet Headgear Assembly Includes Items 9 And 10079 Replacement O-rings For Kit 770 248 5 Per Pkg 216 216 − Limited Warranty Effective January 1 Miller Electric Mfg. Co Visit our website at