Miller Electric PipePro 304 Dimensions, Weights, and Operating Angles, Duty Cycle And Overheating

4-2. Dimensions, Weights, and Operating Angles

	Dimensions
Height	36 in (914 mm)
Width	24 in (610 mm)
Depth	59 in (1499 mm)
A	23-5/8 in (600 mm)
B	21-1/2 in (546 mm)
C	1 in (25 mm)
D	15-5/8 in (397 mm)
E	26-3/8 in (679 mm)
F	58-3/4 in (1492 mm)
G	13/32 in (10 mm) Dia.
	Weight
	925 lb (420 kg)

A

B

C

D

G

4 Holes

E

F

Front Panel End 800 426

! Do not exceed tilt angles or engine could be damaged or unit could tip.

! Do not move or operate unit where it could tip.

	20°
20°	20°
20°

4-3. Duty Cycle And Overheating

Duty Cycle is percentage of 10 min- utes that unit can weld at rated load without overheating.

If unit overheats, output stops, a Help message is displayed (see Section 8-10), and cooling fan runs. Wait fifteen minutes for unit to cool. Reduce amperage or voltage, or duty cycle before welding.

NOTICE − Exceeding duty cycle can damage unit and void warranty.

60% Duty Cycle

6 Minutes Welding 4 Minutes Resting

Overheating

0	A or V
	15
	OR
Minutes	Reduce Duty Cycle

sduty1 5/95 / 196 698

OM-492 Page 13