Miller Electric PipePro 304 manual Connecting The Battery, Negative, Cable last

5-3. Adding Coolant To Radiator

! Stop engine and let cool.

Full

1

Capacity

w/Overflow Tank

6.4 qt (6 L)

.Check coolant level according

to Section 5-2before starting this procedure.

If coolant level is below bottom of radiator filler neck, add coolant as follows:

1 Radiator Air Bleed Screw

Remove radiator air bleed screw. Add coolant to radiator until coolant is at bottom of filler neck. This en- sures all air is purged from the sys- tem.

Reinstall screw and radiator cap. Check coolant level in recovery tank (see Section 5-2).

Engine coolant is a mixture of water and ethylene glycol base anti- freeze. A solution of 50% antifreeze and 50% water must be used in this engine. Do not use 100% antifreeze or severe damage will occur.

Tools Needed:

Ref. 802 330-G

5-4. Connecting The Battery

!	Connect
	negative (−)
	cable last.
	−	+
		Tools Needed:
		3/8, 1/2 in
	Ref. 213 263-B / 802 330-G / Ref. S-0756-D
OM-492 Page 18