Miller Electric S-74DX manual Operational Terms, Power Switch, Program Push Button

SECTION 6 − OPERATION

6-1. Operational Terms

The following is a list of terms and their definitions as they apply to this wire feeder:

General Terms:
Cold Wire Jog	Feeding wire without contactor or gas valve being energized.
Sequence	A portion of the weld program, such as preflow, run-in, start, weld, crater, burnback, and postflow.
Weld Program	A group of sequences that make up a weld cycle.

6-2. Power Switch

1

1 Power Switch

802 809-A

6-3. Program Push Button

1 Program Display

1

2

Non-CE Models

1

Program

3 2

CE Models

3

The number of the active program is displayed.

2 Program Push Button

Press button to activate program select feature. To change the pro- gram number, press the Program push button and rotate the Adjust control.

3 Program Push Button LED

The LED lights to indicate the Pro- gram push button is active.

OM-1500-9 Page 17