Making Measurements Using Spectrum Analyzer Mode
Using the Power Measurement Functions to make Transmitter Measurements
4.Press (MEAS~SER) and Power Menu to access the power measurement functions.
5.Press Setup and CHANNEL BANDWDTH Enter the value for the channel bandwidth.
6.Press CHANNEL SPACING Enter the value for the channel spacing. (The spectrum analyzer will use the last entered values for channel bandwidth and spacing, if they are not entered.)
7.Press Previous Menu to return to the main power menu.
8.Press ADJ CHAN POWER to activate the function.
~revlaus
MC2”U
SPAN 79.47 kHZ
1.0 kHL | SW 300 |
Figure 536. Adjacent Channel Power
9.To use the extended Adjacent Channel Power function, press Previous Menu , then press ADJ CHAN POWER extd