HP Cable Box 8591C manual To Recall a State, Internal

Using Spectrum Analyzer Features

Saving and Recalling Data from Analyzer Memory

To Recall a State

1.Press [jZ?KQ If CARD is underlined, press INTERNAL CARD to select

INTERNAL.

2.Press INTERNAL + STATE

3.Enter the register number under which the state was saved and the state is recalled automatically.

State data can also be recalled by using the catalog:

1.Press [RECALL). If CARD is underlined, press INTERNAL CARD to select

INTERNAL.

2.Press Catalog Internal and CATALOG REGISTER. Use the knob to highlight the number of the state register to be retrieved. The state registers have a “ST” preceding the register number.

3.Press LOAD FILE .

NOTE

Register 9 is a special register which can aid in recovering from inadvertent loss of line power (power failure). Press @ZXiJ, INTERNAL 4 STATE, then 9 to place the cable TV analyzer in the state that existed just prior to the loss of power or set POWER ON LAST to do this automatically

3 - 9