Default CAL Data

If You Have a Problem

Before You Call Hewlett-Packard

2. Press the following cable TV analyzer keys:

ICAL) More 1 of 3 More 2 of 3

3. Perform the CAL FREQ and CAL AMPTD routines, or the

CAL FREQ & A#PTD routine. Be sure CAL OUT is connected to the cable TV analyzer input.

If the CAL OUT signal cannot be found, press (F R E Q U E N C Y ), -37 @ before performing the

CAL FREQ or CAL FREQ & AMPTD.

4.Set the display position by using the steps in “If the display position is offset. ”

5.Press ICAL), CAL STORE.

Some user configurations may need to be reset.

DEFAULT CAL DATA can only be accessed by entering a center frequency of -37 Hz. The center frequency -37 Hz acts as a pass code for

DEFAULT CAL DATA

8 - 9