Using Spectrum Analyzer Features

Saving and Recalling Data from the Memory Card

To Enter a Prefix

Memory card data can be stored and recalled using a prefix. To enter a prefix, press @i’ZFLFj or (CONFIG_), Change Prefix .

Pressing Change Prefix accesses a menu containing the letters of the alphabet, the underscore symbol (-), the number symbol (#), a space, and the clear function. To select a character, press the softkey that displays the group of characters that contains the desired character. The softkey menu changes to allow you to select an individual character. If you make a mistake, press (-1 to space back over the incorrect character. Additional characters are

available by pressing Nore i of 2 . Numbers may be selected with the numeric keypad.

The prefix can be from one to seven characters long. The longer the prefix, the shorter the register number must be. The total length of the prefix and register number cannot exceed eight characters. The prefix can be any character; however, the underscore should not be the Erst character of the prefix.

An existing preEx can be cleared with the clear function. Press [CONFIGI) or (jiIspLAy), Change Prefix , YZ,# Spc Clear , then Clear to clear the current preEx. To change a preEx, clear the existing preEx and then enter a new preEx.

3-19