Using Spectrum Analyzer Features

External Keyboard

To Enter Programming Refer to the HP 8590 E-Series and L-Series Spectrum Analyzers and

CommandsHP 8591 C Cable TV Analyzer Programmer’s Guide for more information.

1.Press (F8) on the external keyboard to enter the mode for executing remote commands.

2.Type in a programming command (for example, type IP).

3.Press @EiEK] on the external keyboard to execute the command.

N O T E

Unlike entering a remote programming command using an external controller, entering the remote programming commands with the external keyboard does not require including the cable TV analyzer address. It is also not necessary to terminate the programming line with a semicolon. However, semicolons are necessary for separating the programming commands. For example, a program line is entered via the external controller as: OUTPUT 718; “CF 300MHZ; SP 1MHZ; ‘I. The same program line is entered using the external keyboard as: CF 300MHZ ; SP 1MHZ ; CENTER)

After IF8_1 is pressed, the cable TV analyzer remains in command mode. To return to the title entry mode, press LESC] (on the external keyboard).

To Enter a PrefixRefer to the HP 8590 E-Serks and L-Series Spectrum Analyzers and HP 8591 C Cable TV Analyzer Programmer’s Guide for more information

1.Press (F7) on the external keyboard to enter the mode for entering a prefix.

2.Type in the prefix.

3.Press (ENTER) on the external keyboard.

3 - 6 9