Using Spectrum Analyzer Features
learn About the Analog+ Display Mode
11:41:05 JUL 29, 1993
fP
REF 48.8 dBmV AT i0 dB
OSP LINE
ON OFF
Llmlt
Lines
More
1 of 2
START 0 | Hz | uew I IHZ | STOP | 1.500 | GHL | T |
RES | BW 3.0 MHz | SWP | 30.0 | rnS,C |
Figure
Example: Use the analog+ display mode to look at the calibrator signal.
1.Connect the CAL OUT signal to the cable TV analyzer’s INPUT 75 0. Press (FEET], (FREQUENCY), START FREQ 0 (Hz), STOP FREQ 1.5 IGHz).
2.Press (jj) and ANALOG+ ON OFF (ON) to turn on the analog+ display mode. Use the knob, step keys, or the data entry keys to change the DOT DENSITY.
3.Press m to activate a marker and use the knob to move it.
4.Press
N O T E
Limit lines can be used to test data on an analog+ display, but they cannot be displayed.