Spectrum Analyzer Made Key Descriptions

Spectrum Analyzer Mode Functions

Pressing Change Title accesses the softkey menus that contain the available characters and symbols. A programming command can be entered in the screen title area. It can then be executed from the front panel by pressing EXECUTE TITLE

The screen title will remain on the screen until either Change Title is pressed again or a trace is recalled that was saved with a screen title. A screen title can also be cleared by using the clear function. Press cm),

Change Title , YZ,# Spc Clear , Clear to clear the current screen title.

Pressing Change Title accesses a menu containing the letters of the alphabet, the underscore symbol (-), the number symbol (#), a space, and the Clear softkey. To select a character, press the softkey that displays the group of characters that contains the desired character. The softkey menu changes to allow you to select an individual character. If you make a mistake, press [BK) to space back over the incorrect character. Additional characters are available by pressing More I of 2 . Numbers may be selected by using the numeric keypad.

Pressing KPG TITLE provides additional characters for the menu accessed by pressing Change Title . Pressing

RPG TITLE provides lowercase letters, numbers, Greek letters, and punctuation symbols. To access additional characters, press RPG TITLE When RPG TITLE is pressed, a character table appears on the screen. To select a character, turn the knob to position the cursor under the desired character and press the (ENTER) key. The step keys move the cursor between rows. When all desired characters have been entered, press WINDOWS [EXT]. All other analyzer functions are inoperative until the [NEXT) or IHOLD) key is pressed.

Front-Panel Key Access a or (j-1

6-37