General Safety Considerations

W A R N I N G

W A R N I N G

C A U T I O N

W A R N I N G

W A R N I N G

Before this instrument is switched on, make sure it has been properly grounded through the protective conductor of the ac power cable to a socket outlet provided with protective earth contact.

Any interruption of the protective (grounding) conductor, inside or outside the instrument, or disconnection of the protective earth terminal can result in personal injury.

There are many points in the instrument which can, if contacted, cause personal injury. Be extremely careful. Any adjustments or service procedures that require operation of the instrument with protective covers removed should be performed only by trained service personnel.

Before this instrument is switched on, make sure its primary power circuitry has been adapted to the voltage of the ac power source.

Failure to set the ac power input to the correct voltage could cause damage to the instrument when the ac power cable is plugged in.

No operator serviceable parts inside. Refer servicing to qualified personnel. To prevent electrical shock, do not remove covers.

If this instrument is used in a manner not specified by Hewlett-Packard ,Co., the protection provided by the instrument may be impaired.

Instruction Manual The instruction documentation symbol. The product is marked with this symbol when it is necessary for the user to refer to the instruction in the manual.

. . .

Vlll