If You Have a Problem
Before You Call
If you suspect the analyzer configuration is wrong
Reset the cable TV analyzer configuration to the state it was in when it was originally shipped from the factory using DEFAULT CONFIG . Press the following keys:
@5GiE) More I of 3
DEFAULT CONFIG DEFAULT CONFIG
Note that DEFAULT CONFIG requires a double key press. See the softkey
description for DEFAULT CONFIG in Chapter 6.
If the display position is offset
Perform the following procedure to adjust the vertical and horizontal position of the display.
1. Press the following keys to adjust the vertical position:
ICALl More 1 af 4
CRT W&T POSITION
2.Use the knob or step keys to adjust the vertical position.
3.Press the following keys to adjust the horizontal position: (CAL) More 1 of 4
CRT HORZ POSITION
4.Use the knob or step keys to adjust the horizontal position,
5.Press (CAL], CAL STORE to save the new vertical and horizontal display position.