Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
DISPLAY --f CARD
DISPLAY CNTL I
Dispose User Mem
saves the current analyzer display image on the memory card for viewing or copying later. It does not save the analyzer state or trace, so it cannot be used to restore an instrument to the conditions at the time the image was saved.
To save the current display image, press
DISPLAY + CARD , use the numeric keypad to enter a number, and press (ENTER). If you want the Ille name of the stored data to contain a prefix, press Change Prefix to enter a prefix before storing the data. If the display image was stored using a prefix, the file name for the display image consists of
Front-Panel Key Access m
displays the status of the auxiliary connector input (control line I) on the analyzer screen (high = 1 or low = 0, in TTL).
accesses the softkeys ERASE MEM CARD , ERASE DLP MEM , ERASE STATEALL , ERASE TRACEALL , and
ERASE MEM ALL which are used to erase the user programs and variables that are in analyzer memory.
N O T E
Use DELETE FILE to selectively delete stored programs or variables from analyzer memory
