
Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
BAUD
RATE
BINARY SPAN
BLANK A
BLANK B
BLANK C
BLANK
CARD
sets the data transmission speed. (Also see the description for the (COPY] key.) The baud rate is set to 1200 by pressing
DEFAULT CONFIG .
displays the output of the span DAC that is located on the A7 Analog Interface assembly. This is a service diagnostic function and is for service use only.
stores the amplitude data for trace A and removes it from the screen. The trace A register will not be updated as the analyzer sweeps.
stores the amplitude data for trace B and removes it from the screen. The trace B register will not be updated as the analyzer sweeps.
stores the amplitude data for trace C and removes it from the screen. The trace C register will not be updated as the analyzer sweeps.
deletes all the Eles from the memory card. Pressing BLANK CARD displays the message: If you are sure,
press key again to purge data. Press BLANK CARD again if you want to delete all files from the memory card.