Preparing For Use

Printing or Plotting

Interconnection and Printing Instructions

1. Turn off the cable TV analyzer and the printer.

N O T E

The RS-232 interface allows only one device (either the printer or the plotter) to be connected to the cable TV analyzer. Refer to the programmer’s guide for more information on RS-232 protocol and cable wiring.

2.Connect the printer using an RS-232 cable.

3.Turn on the cable TV analyzer and printer.

4.P r e s s @%FiQ, M o r e 1 o f 3

5.To set the baud rate to 9600 baud, press BAUD RATE, 9600, IHz). To set the baud rate to 1200 baud, press: BAUD RATE , 1200, (Hz).

II

N O T E

Some of the programs in this manual utilize 1200 baud. If your system uses the RS-232 handshake lines, you can use 9600 baud for all of the programs.

6. Press @%?@, Print Conf fg .

1-18