Preparing For Use

Printing or Plotting

4.Press (CONFIG].

5.Press COPY DEV PRNT PLT so that PLT is underlined.

6.Press (CONFIG), Plot Conf kg . You can choose a full-page, half-page, or quarter-page plot with the PLTS/PG 1 2 4 softkey. Press PLTS/PG 1 2 4 to underline the number of plots per page desired.

7.If two or four plots per page are chosen, a function is displayed that allows you to select the location on the paper of the plotter output. If two plots

PLT 11

per page are selected, then the LOC _ _ function is displayed. If four

PLT Cl _

plots per page are selected, then the LOC _ _ is displayed. Press the softkey until the rectangular marker is in the desired section of softkey label. The upper and lower sections of the softkey label graphically represent where the plotter output will be located.

8.Press PLT->L JT ON OFF so that ON is underlined.

9.Then press [s).

Printing after Plotting or Plotting after Printing

Pressing IcoPv] without changing COPY DEV PRNT PLT produces the function last entered (a print or a plot).

•To print after doing a plot, press Cm], COPY DEV PRMT PLT (so that PRNT is underlined), then [Copy).

•To plot after printing, press I-1, COPY DEV PRNT PLT (so that PLT is underlined), and (copy).

l-38