HP Cable Box 8591C manual To Recall Limit-Line lkbles or Amplitude Correction Factors

Using Spectrum Analyzer Features

Saving and Recalling Data from Analyzer Memory

To Recall Limit-Line lkbles or Amplitude Correction Factors

1.Press [RECALL]. If CARD is underlined, press INTERNAL CARD to select

INTERNAL.

2.Press Internal + Trace . This accesses a menu with LIMIT LINES and AMP COR

3.Press either LIMIT LINES to recall a limit-line table or, AMP COR to recall amplitude-correction factors.

4.Enter the register number under which the data was stored.

5.Press [ENTER].

To Protect Data From Being Overwritten

If you want to protect all state, trace, limit line, and amplitude correction data from being overwritten, press m, then SAV LOCK ON OFF so that ON

is underlined. lkble 3-l summarizes the functions when saving and recalling data to and from cable TV analyzer memory.

NOTE

This feature does not protect state, trace, limit line, and amplitude correction data from

[ERASE MEM ALL].

3-13