Spectrum Analyzer Mode Key Descriptions
Spectrum Analyzer Mode Functions
Cable TV Analyzer Programmer’s Guide and Chapter 1 of this manual.
If you want the softkey labels to be printed with the analyzer display printout when using [Copy), press PRT MENU ON OFF so that ON is underlined.
Press [ml and the process will begin. The screen remains frozen (no further sweeps taken) until the data transfer to the printer is complete. The analyzer works with many Hewlett-Packard and Epson compatible printers.
The plotting process is similar to the printing process.
On the analyzer, press C-1, Plot Conf ig Use
BAUD RATE to change the baud rate of the analyzer, if
necessary. For Option 021, use PLOTTER ADDRESS to change the HP-IB address for the plotter, if necessary. With PLTS/PG 1 2 4 , you can choose a full-page,
half-page, or quarter-page plot. Press PLTS/PG 1 2 4 to underline the number of plots per page desired. If two or four plots per page are chosen, a softkey function is displayed that allows you to select the location of the plotter output on the paper. If two plots per page are selected, PLT * mc * - is displayed. If four plots per page are
selected, PLT _ -LOG _ _ is displayed. Press the softkey until the rectangular marker is in the desired section of the softkey label. The upper and lower sections of the softkey label graphically represent the position of the page where the plotter output will be located.