
Using Spectrum Analyzer Features
learn How to Enter Amplitude Correction Factors
/;p |
|
|
IREF1307:48.805dmll”JVL29.AT,99310 | dB | SELECT |
PEL\K |
| |
| POINT | |
LOG |
| |
|
| |
10 |
|
|
dB/ |
| ELEC |
|
| %I |
|
| RE |
|
| SELECT |
|
| AMPLITUD |
PURGE
AMP cm
CENTER 300.0 | MHr |
| SPAN | 500.0 | MHz |
RES BW | 3.0 MHZ | “SW 1 MHZ | SWP | 20 0 | msec |
Figure 3-l 2. Completed Amplitude-Correction Table
9. Press EDIT DONE when all the points have been entered
Use steps 10 and 11 to display corrected versus uncorrected amplitude trace data for trace comparison.
10.Display the
[pTiq
CLEAR WRITE A
VIEW A
11.Display the uncorrected amplitude trace in trace B by pressing the following keys:
TRACE A 3 C until B is selected
CLEAR WRITE 3
a, More 1 of 4, More 2 of 4 , More 3 of 4, Amp Cor AMP COR ON OFF until OFF is selected