Making Measurements Using Spectrum Analyzer Mode
Using the
1.Set the center frequency of the spectrum analyzer to the frequency of the modulated signal. Decrease the frequency span of the spectrum analyzer. If necessary, adjust the reference level of the spectrum analyzer so that the peak signal is displayed near the top graticule.
FULL
SPRN
ZERO
SPtiN
LAST
SPAN
BRNO
LOCK
CENTER 50.000 | MHz |
| SPhN 5.000 | MHz |
RES BW 30 | kHz | VBW 38 kHz | SWP 28 | hS?b |
Figure
The Gate Utility can be used to simplify the following steps. See Chapter 6 for descriptions of the gate utility softkeys.