Spectrum Analyzer Mode Key Descriptions

Spectrum Analyzer Mode Functions

ERASE DLP MEM

allows you to dispose of the DLPs, all traces defined by TRDEF, and all VAREF variables that are in analyzer memory. Press Dispose User Mem , then press

ERASE DLP MEM which causes the message to appear on the analyzer screen: If you are sure, Press key again to purge data. Press ERASE DLP MEM again if you want to dispose of the DLPs in memory. Press any other softkey if you do not want to dispose of the DLPs in memory.

I*OTtUse DELETE FILE to selectively-delete stored programs or variables from analyzer memory

ERASE MEM ALL

Front-Panel Key Access C-1

allows you to purge all user state registers, all user trace registers, all mode registers, the editor buffer, Group delay normalization, all DLP memory, and all microprocessor stack data. The stack pointer is set to its power-up value. No system globals are erased and the calibration data is preserved. Pressing ERASE MEM ALL causes a message to appear on the analyzer screen: If you are sure, Press key again to purge data. Press ERASE MEM ALL again if you want to dispose of all user memory. Press any other softkey if you do not want to dispose of all user memory.

6-65