If You Have a Problem

Error Messages

INVALID CARD: DIRECTORY

Indicates the memory card has not been formatted. (U)

INVALID CARD: NO CARD

Indicates a memory card has not been inserted. (LJ)

INVALID CARD: TYPE

Indicates one of the following conditions: a card reader is not installed, the memory card is write-protected (check the position of the switch on the memory card), the memory card is a read-only memory (ROM) card, or a memory card has not been inserted.

INVALID CHECKSUM: USTATE

The user-defined state does not follow the expected format. (U)

INVALID COMPARE OPERATOR

An IF/THEN or REPEAT/UNTIL routine is improperly constructed. Specifically, the IF or UNTIL operands are incorrect. (U)

INVALID DET: FM or TV option only

Indicates that the selected detector cannot be used until the appropriate option is installed in the cable TV analyzer. (U)

INVALID ENTER FORMAT

The enter format is not valid. See the appropriate programming command description to determine the correct format. (U)

INVALID <file name> NOT FOUND

Indicates that the specified Iile could not be loaded into cable TV analyzer memory or purged from memory because the file name cannot be found. w>

INVALID FILENAME _ _ _

Indicates the specified file name is invalid. A file name is invalid if there is no lile name specified, if the first letter of the file name is not alphabetic, or if the specified file type does not match the type of hle. See the description SAVRCLW or STOR programming command for more information. (U)

8-20